Natural Way to Remove Limescale from the Toilet Quickly

is one of the inventions that highlights modern society, however, keeping toilets clean and disinfected can be a headache for many, especially , or commonly called flushing may seem impossible to clean and again give the new look to bowl.Removing limescale bathroom toilet

Fortunately, the limescale and impurities present in toilets are usually fairly easy to remove with a few tricks you can perform at home and a homemade solvent or two. Before proceeding fully to know these tips, it is important to know what are the causes of these deposits of tartar in our bathroom, something very common in all homes and even in lavatories and other water tanks.

What causes tartar in the toilet

What causes tartar and other yellow and brown colored impurities in the toilet are an accumulation of calcium and other minerals. The toilet is a favorite spot for tartar stains because there is always some water fluctuating in the bowl, just waiting to cause problems. These stains accumulate over time resulting in an unpleasant brownish color around the bowl of our toilet.

Limescale deposits on the toilet tend to be larger and tougher in places with drinking water because there are more lime and minerals present in the water supply. Calcium deposits are not limited to the toilet, unfortunately. These can be present in any place where there is water flow, including the sink, shower, walls and shower head, among others.

How to prevent tartar formation in toilets

There are ways to prevent tartar build-up in toilets and other parts, thus saving us a great job. First, you could install a system to soften the water in your home, unfortunately, these are usually very expensive, so the following will be pending the first sign of formation of these calcium deposits. This ensures that your removal is easier to carry out, however, with the following tips you can also remove deposits of tartar stuck in the toilets, without the need to buy a new one.

How to remove limescale from the toilet

Use white vinegar and lemon

First, let’s try to solve it in an ecological way. We should employ a mild, natural acid, such as lemon juice or vinegar, this can be very effective shelling the calcium deposits in the cocoon. Depending on the severity of the stain, the liquid may have to be reapplied and scrubbed vigorously several times with water-based sanding paper or a cloth. To achieve a better effect, you can drain the water from the toilet to ensure that the liquid applied has greater concentration and effect.

A stone pomez

Pumice can easily remove tartar stains from the toilet, but you should never use it dry, as this can cause damage to the toilet. To avoid this, immerse the stone in water and wait for it to soften a little, in this way scour the toilet and you will see how the tartar shells are removed, if you combine it with the prior technique you will get faster results.

Use cola

The action of coke can help you remove stains from the toilet, so you should combine it with other products to maximize its effect. For this you will need:

  • A brush with a long handle
  • Sodium bicarbonate
  • A cup of vinegar
  • 350 ml of coke

First we will apply the coke (having the toilet dry previously) then we must brush very well and leave to act for at least 30 minutes, before removing with water the liquids, it is probable that in this step the deposits of tartar will already come off, although not all.

Now pour the white vinegar next to the baking soda that we must sprinkle very well on the tartar stains. Afterwards we must thoroughly brush the area to finish loosening the whole stain. As a last step, add baking soda again and give it a last carving with the brush, this should be enough to leave the toilet completely clean.

Muriatic acid (as a last resort)

If none of the above solutions has worked, there is a more risky way to get tartar removed altogether. For example, muriatic acid can get rid of calcium deposits quickly, but it is also very difficult in porcelain and dangerous if you do not know what you are doing. First, make sure the area is well-ventilated to avoid poisoning.

Also, be sure to wear eye protection, rubber gloves and clothing that completely cover your skin. Then pour 5 gallons or more of water into the bowl, followed by the slow and careful addition of 12 ounces of muriatic acid. Then use a brush with a long handle to carefully scatter the solution around the stain. This step may have to be repeated several times over the next hour or two, but doing so should completely eradicate the tartar and stains on the toilet. It is important to prevent children or pets from coming into contact with the water, and try to keep the toilet lid closed.

This is a solution of last resort, since it is most advisable to try with the homemade solutions offered, and if they do not work, to repeat them, since these deposits of tartar can be very stuck, but they are not impossible to eradicate, although in some cases require more effort.

Leave a Reply